Hardware Factory Common Problems

As we all know, metal stamping parts are produced by metal stamping plant. Metal stamping factory is specialized in producing all kinds of stamping parts. Metal stamping plant in the production process of the workpieces will summarize the details, here's the problem encountered in the process.

Stampings common problem metal stamping plant are as follows:

1, roller India: cleaning roller or feed rollers attached to foreign body (a fixed pitch occur), in general, foreign body roll printed material on the boards can be removed.

2, edge roll smash may perhaps wrinkling: coil line guide rollers may perhaps guide nip hours on the mold to produce wrinkling scenario, since roll into unyielding balance caused.

3, glitch: The next part of steel cut surface burrs to cut surface as a reference, when the burr height of 0.2mm or more, and iron in place here will produce damage to the mold and punch;

4. Bump: coil line foreign body (iron, dust) caused by mixed punch.

5, the slide India: Due to the roller slide caused, occurred in a sudden stop or acceleration.

Metal stamping plant encountered problems over time will have their own approach to deal with these questions must be a good means of metal stamping plant processing products.